SHOP ALL 3 SERIES & M3 PARTS
SHOP ALL 3 SERIES & M3 PARTS
Upgrade the exterior of your BMW with our M-Style Mirror Caps, designed to give your vehicle a sharper, more aggressive M-inspired appearance while maintaining a clean and refined finish.
These are direct replacement mirror caps, replacing the original factory covers rather than fitting over top for a more integrated appearance.
Vehicle Fitment
BMW 2 Series (G42)
230i • M240i
BMW 3 Series (G20 / G21)
330i • M340i
BMW 4 Series (G22 / G23 / G26)
430i • M440i
BMW 5 Series (G30 / G31)
530i • 540i • M550i
BMW 7 Series (G11 / G12)
740i • 750i • M760i
BMW 8 Series (G14 / G15 / G16)
840i • M850i
Important Fitment Notice
Certain newer BMW models and configurations are equipped with the newer M-style mirror design from factory and require a different mirror cap.
In particular, 2023+ BMW M340i LCI models are not compatible with this version due to the updated factory mirror design.
Fitment on the M240i, M440i, M850i and other M Performance configurations can also vary depending on model year and factory mirror equipment.
Please provide us with your vehicle's year and exact model before ordering so Fezline Parts can confirm the correct mirror-cap version for your vehicle.
Features
M-inspired mirror cap design
Direct replacement for the original factory mirror covers
Vehicle-specific design for a clean, integrated appearance
Extended M-style profile
Sold as a pair — driver and passenger side
Professional installation available
Available Finishes
Gloss Black
A clean, high-gloss finish that pairs naturally with other gloss black exterior accents.
Carbon Lookalike
Provides the appearance of carbon fibre for customers looking for a carbon-style finish without choosing genuine carbon fibre.
Real Carbon Fibre
Our premium genuine carbon fibre option for customers looking for an authentic carbon finish.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
For customers purchasing the product without installation, professional installation is recommended to ensure proper alignment and secure fitment.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Available on eligible products
Shipping Available
Across Canada & eligible international destinations
A clean M-inspired upgrade that adds a sharper and more distinctive appearance to your BMW.
Where Style & Performance Collide.
Upgrade the exterior of your BMW with our M-Style Mirror Caps, designed to give your vehicle a sharper, more aggressive M-inspired appearance while maintaining a clean and refined finish.
These are direct replacement mirror caps, replacing the original factory covers rather than fitting over top for a more integrated appearance.
Vehicle Fitment
BMW 2 Series (G42)
230i • M240i
BMW 3 Series (G20 / G21)
330i • M340i
BMW 4 Series (G22 / G23 / G26)
430i • M440i
BMW 5 Series (G30 / G31)
530i • 540i • M550i
BMW 7 Series (G11 / G12)
740i • 750i • M760i
BMW 8 Series (G14 / G15 / G16)
840i • M850i
Important Fitment Notice
Certain newer BMW models and configurations are equipped with the newer M-style mirror design from factory and require a different mirror cap.
In particular, 2023+ BMW M340i LCI models are not compatible with this version due to the updated factory mirror design.
Fitment on the M240i, M440i, M850i and other M Performance configurations can also vary depending on model year and factory mirror equipment.
Please provide us with your vehicle's year and exact model before ordering so Fezline Parts can confirm the correct mirror-cap version for your vehicle.
Features
M-inspired mirror cap design
Direct replacement for the original factory mirror covers
Vehicle-specific design for a clean, integrated appearance
Extended M-style profile
Sold as a pair — driver and passenger side
Professional installation available
Available Finishes
Gloss Black
A clean, high-gloss finish that pairs naturally with other gloss black exterior accents.
Carbon Lookalike
Provides the appearance of carbon fibre for customers looking for a carbon-style finish without choosing genuine carbon fibre.
Real Carbon Fibre
Our premium genuine carbon fibre option for customers looking for an authentic carbon finish.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
For customers purchasing the product without installation, professional installation is recommended to ensure proper alignment and secure fitment.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Available on eligible products
Shipping Available
Across Canada & eligible international destinations
A clean M-inspired upgrade that adds a sharper and more distinctive appearance to your BMW.
Where Style & Performance Collide.
Upgrade the front end of your BMW with our G20 Pre-LCI Front Kidney Grill, designed as a direct replacement for the factory kidney grill for a cleaner, sportier and more aggressive appearance.
Available in multiple distinct grill designs, allowing you to choose the style that best complements your build while maintaining a clean, integrated appearance with the factory front end.
Vehicle Fitment
BMW 3 Series (G20) — 2019–2022 (Pre-LCI)
330i • M340i
Important Fitment Notice
Designed for 2019–2022 Pre-LCI BMW G20 3 Series models.
Please confirm your vehicle's year, exact model, and front bumper configuration before ordering if you are unsure about compatibility.
Available Styles
Double-Slat
A clean double vertical-slat design for a more aggressive M-inspired front-end appearance.
Diamond Mesh
A distinctive geometric mesh design that replaces the traditional vertical slats for a more modern and aggressive appearance.
M-Colour Double-Slat
A sport-inspired double-slat design featuring subtle BMW M-style accent colours integrated into the grill.
Single-Slat
A clean vertical single-slat design offering a subtle upgrade while maintaining a factory-inspired appearance.
Features
Direct replacement for the factory kidney grill
Designed specifically for the G20 Pre-LCI front end
Four distinct grill styles available
Gloss black outer surround
Clean, integrated fit
Sportier front-end appearance
Professional installation available
Available Finish
Gloss Black
A deep, high-gloss finish designed to complement other gloss black exterior accents and provide a clean, premium appearance.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper alignment and secure fitment.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Available on eligible products
Shipping Available
Across Canada & eligible international destinations
A clean front-end upgrade with multiple styles to match your build.
Where Style & Performance Collide.
Upgrade the front end of your BMW with our G20 Pre-LCI Diamond-Style Carbon Fibre Front Kidney Grill, designed as a direct replacement for the factory kidney grill with a distinctive geometric mesh design and genuine carbon fibre construction.
The diamond-style pattern creates a more modern and aggressive front-end appearance, while the genuine carbon fibre finish adds a premium performance-inspired touch to the G20 exterior.
Vehicle Fitment
BMW 3 Series (G20) — 2019–2022 (Pre-LCI)
330i • M340i
Important Fitment Notice
Designed for 2019–2022 Pre-LCI BMW G20 3 Series models.
Please confirm your vehicle's year, exact model, and front grill configuration before ordering if you are unsure about compatibility.
Features
Diamond-style geometric mesh design
Direct replacement for the factory kidney grill
Genuine carbon fibre construction
Designed specifically for the G20 Pre-LCI front end
Distinctive performance-inspired appearance
Clean, integrated fit
Professional installation available
Available Finish
Real Carbon Fibre
Our premium genuine carbon fibre option for customers looking for an authentic carbon finish.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper alignment and secure fitment.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Available on eligible products
Shipping Available
Across Canada & eligible international destinations
A distinctive diamond-style front-end upgrade finished in genuine carbon fibre.
Where Style & Performance Collide.
Upgrade the front end of your BMW 3 Series with our G20 Pre-LCI M Performance-Style Front Lip V1, designed specifically for M Sport front bumpers to create a lower, wider and more aggressive appearance.
The multi-piece design follows the lower contours of the factory bumper, featuring extended outer corner sections and a pronounced centre splitter that gives the G20 a clean M Performance-inspired front-end profile.
Manufactured from high-quality automotive-grade ABS and available in Gloss Black or Carbon Lookalike, this front lip complements the factory M Sport body lines while adding a more distinctive performance-inspired appearance.
Vehicle Fitment
BMW 3 Series (G20) — 2019–2022 (Pre-LCI)
330i • M340i
Important Fitment Notice
Designed specifically for 2019–2022 Pre-LCI BMW G20 models equipped with the M Sport front bumper.
Not designed for vehicles equipped with the standard non-M Sport front bumper.
Please provide us with your vehicle's year, exact model, and a photo of the front bumper before ordering if you are unsure about compatibility.
Features
M Performance-inspired V1 front lip design
Designed for the Pre-LCI G20 M Sport front bumper
Multi-piece splitter design
Extended outer corner sections
Pronounced centre splitter
Creates a lower and wider front-end appearance
High-quality automotive-grade ABS construction
Lightweight and impact resistant
Available in Gloss Black or Carbon Lookalike
Professional installation available
Available Finishes
Gloss Black
A clean, high-gloss finish that pairs naturally with other gloss black exterior accents.
Carbon Lookalike
Provides the appearance of carbon fibre for customers looking for a carbon-style finish without choosing genuine carbon fibre.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper alignment and secure fitment.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Available on eligible products
Shipping Available
Across Canada & eligible international destinations
A clean M Performance-inspired upgrade that gives the G20 a lower, wider and more aggressive front-end profile.
Where Style & Performance Collide.
Upgrade the front end of your BMW 3 Series with our G20 Pre-LCI M Performance-Style Front Lip V2, designed specifically for the M Sport front bumper with a sleek, low-profile design that follows the factory body lines.
Compared with the more pronounced multi-piece styling of V1, the V2 design features a cleaner continuous lower profile with extended outer corners, giving the G20 a lowered and wider appearance without overpowering the original front-end design.
Available in Gloss Black or Carbon Lookalike to complement different exterior builds.
Vehicle Fitment
BMW 3 Series (G20) — 2019–2022 (Pre-LCI)
330i • M340i
Important Fitment Notice
Designed specifically for 2019–2022 Pre-LCI BMW G20 models equipped with the M Sport front bumper.
Not designed for vehicles equipped with the standard non-M Sport front bumper.
Please provide us with your vehicle's year, exact model, and a photo of the front bumper before ordering if you are unsure about compatibility.
Features
M Performance-inspired V2 design
Sleek, low-profile front splitter
Continuous lower front-end appearance
Extended outer corner sections
Creates a lower and wider front-end profile
Designed for the Pre-LCI G20 M Sport front bumper
Available in Gloss Black or Carbon Lookalike
Professional installation available
Available Finishes
Gloss Black
A clean, high-gloss finish that pairs naturally with other gloss black exterior accents.
Carbon Lookalike
Provides the appearance of carbon fibre for customers looking for a carbon-style finish without choosing genuine carbon fibre.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper alignment and secure fitment.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Available on eligible products
Shipping Available
Across Canada & eligible international destinations
A sleek M Performance-inspired front lip that gives the G20 a lower and wider front-end profile.
Where Style & Performance Collide.
Upgrade the front end of your BMW 3 Series with our G20 Pre-LCI M Performance-Style Front Lip V3, designed specifically for the M Sport front bumper with a more pronounced and performance-focused profile.
The V3 design features a wide continuous centre splitter with raised vertical fins and extended outer corner sections, creating a more aggressive lower front-end appearance while following the factory contours of the G20 M Sport bumper.
Available in Gloss Black or Carbon Lookalike to complement different exterior builds.
Vehicle Fitment
BMW 3 Series (G20) — 2019–2022 (Pre-LCI)
330i • M340i
Important Fitment Notice
Designed specifically for 2019–2022 Pre-LCI BMW G20 models equipped with the M Sport front bumper.
Not designed for vehicles equipped with the standard non-M Sport front bumper.
Please provide us with your vehicle's year, exact model, and a photo of the front bumper before ordering if you are unsure about compatibility.
Features
M Performance-inspired V3 design
Wide continuous centre splitter
Raised vertical centre fins
Extended outer corner sections
Creates a lower and wider front-end profile
Designed for the Pre-LCI G20 M Sport front bumper
Available in Gloss Black or Carbon Lookalike
Professional installation available
Available Finishes
Gloss Black
A clean, high-gloss finish that pairs naturally with other gloss black exterior accents.
Carbon Lookalike
Provides the appearance of carbon fibre for customers looking for a carbon-style finish without choosing genuine carbon fibre.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper alignment and secure fitment.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Available on eligible products
Shipping Available
Across Canada & eligible international destinations
A more aggressive M Performance-inspired front lip with a distinctive finned centre splitter design.
Where Style & Performance Collide.
Upgrade the front end of your BMW 3 Series with our G20 Pre-LCI ADRO-Style Front Lip V4, designed specifically for the M Sport front bumper with a sharp, aggressive profile that transforms the lower front end.
The ADRO-inspired design features a wide centre splitter, sharply sculpted outer sections, and pronounced corner extensions that follow the contours of the M Sport bumper for a lower, wider and more performance-focused appearance.
Available in Gloss Black or Real Carbon Fibre to complement different exterior builds.
Vehicle Fitment
BMW 3 Series (G20) — 2019–2022 (Pre-LCI)
330i • M340i
Important Fitment Notice
Designed specifically for 2019–2022 Pre-LCI BMW G20 models equipped with the M Sport front bumper.
Not designed for vehicles equipped with the standard non-M Sport front bumper.
Please provide us with your vehicle's year, exact model, and a photo of the front bumper before ordering if you are unsure about compatibility.
Features
ADRO-inspired V4 front lip design
Designed for the Pre-LCI G20 M Sport front bumper
Wide centre splitter design
Sculpted outer sections
Pronounced corner extensions
Creates a lower and wider front-end profile
Available in Gloss Black or Real Carbon Fibre
Professional installation available
Available Finishes
Gloss Black
A clean, high-gloss finish that pairs naturally with other gloss black exterior accents.
Real Carbon Fibre
Our premium genuine carbon fibre option for customers looking for an authentic carbon finish.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper alignment and secure fitment.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Available on eligible products
Shipping Available
Across Canada & eligible international destinations
A bold ADRO-inspired front-end upgrade designed to give the G20 a sharper, lower and more aggressive profile.
Where Style & Performance Collide.
Upgrade the front end of your BMW 3 Series with our G20 LCI M Performance-Style Front Lip V1, designed specifically for the facelift M Sport front bumper to create a lower, wider and more aggressive appearance.
The V1 design follows the contours of the factory LCI M Sport bumper, adding a sportier lower profile while maintaining a clean and integrated appearance with the original body lines.
Manufactured from high-quality automotive-grade ABS and available in Gloss Black or Carbon Lookalike.
Vehicle Fitment
BMW 3 Series (G20) — 2023+ (LCI)
330i • M340i
Important Fitment Notice
Designed specifically for G20 LCI models equipped with the M Sport front bumper.
Not designed for Pre-LCI models or vehicles equipped with the standard non-M Sport front bumper.
Please provide us with your vehicle's year, exact model, and a photo of the front bumper before ordering if you are unsure about compatibility.
Features
M Performance-inspired V1 front lip design
Designed for the G20 LCI M Sport front bumper
Follows the factory lower bumper contours
Creates a lower and wider front-end appearance
High-quality automotive-grade ABS construction
Lightweight and impact resistant
Available in Gloss Black or Carbon Lookalike
Professional installation available
Available Finishes
Gloss Black
A clean, high-gloss finish that pairs naturally with other gloss black exterior accents.
Carbon Lookalike
Provides the appearance of carbon fibre for customers looking for a carbon-style finish without choosing genuine carbon fibre.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper alignment and secure fitment.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Available on eligible products
Shipping Available
Across Canada & eligible international destinations
A clean M Performance-inspired upgrade designed to give the G20 LCI a lower, wider and sportier front-end profile.
Where Style & Performance Collide.
Upgrade the front end of your BMW 3 Series with our G20 LCI M Performance-Style Front Lip V3, designed specifically for the LCI M Sport front bumper with a wider and more aggressive lower profile.
The V3 design features a continuous centre splitter with four raised centre canards and extended outer corner sections, adding distinctive detailing across the lower front end while following the factory contours of the G20 LCI M Sport bumper.
Manufactured from high-quality automotive-grade ABS and available in Gloss Black or Carbon Lookalike.
Vehicle Fitment
BMW 3 Series (G20) — 2023+ (LCI)
330i • M340i
Important Fitment Notice
Designed specifically for G20 LCI models equipped with the M Sport front bumper.
Not designed for Pre-LCI models or vehicles equipped with the standard non-M Sport front bumper.
Please provide us with your vehicle's year, exact model, and a photo of the front bumper before ordering if you are unsure about compatibility.
Features
M Performance-inspired V3 front lip design
Four raised centre canards
Wide continuous centre splitter
Extended outer corner sections
Designed for the G20 LCI M Sport front bumper
Creates a lower and wider front-end appearance
High-quality automotive-grade ABS construction
Lightweight and impact resistant
Available in Gloss Black or Carbon Lookalike
Professional installation available
Available Finishes
Gloss Black
A clean, high-gloss finish that pairs naturally with other gloss black exterior accents.
Carbon Lookalike
Provides the appearance of carbon fibre for customers looking for a carbon-style finish without choosing genuine carbon fibre.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper alignment and secure fitment.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Available on eligible products
Shipping Available
Across Canada & eligible international destinations
A distinctive M Performance-inspired front lip featuring four raised centre canards for a more aggressive G20 LCI front end.
Where Style & Performance Collide.
Upgrade the front end of your BMW 3 Series with our G20 LCI ADRO-Style Front Lip V4, designed specifically for the LCI M Sport front bumper with a sharp, aggressive profile that transforms the lower front end.
The ADRO-inspired design features a wide centre splitter, sharply sculpted outer sections, and pronounced corner extensions that follow the contours of the LCI M Sport bumper for a lower, wider and more performance-focused appearance.
Available in Gloss Black or Real Carbon Fibre to complement different exterior builds.
Vehicle Fitment
BMW 3 Series (G20) — 2023+ (LCI)
330i • M340i
Important Fitment Notice
Designed specifically for 2023+ LCI BMW G20 models equipped with the M Sport front bumper.
Not designed for Pre-LCI models or vehicles equipped with the standard non-M Sport front bumper.
Please provide us with your vehicle's year, exact model, and a photo of the front bumper before ordering if you are unsure about compatibility.
Features
ADRO-inspired V4 front lip design
Designed for the G20 LCI M Sport front bumper
Wide centre splitter design
Sculpted outer sections
Pronounced corner extensions
Creates a lower and wider front-end profile
Available in Gloss Black or Real Carbon Fibre
Professional installation available
Available Finishes
Gloss Black
A clean, high-gloss finish that pairs naturally with other gloss black exterior accents.
Real Carbon Fibre
Our premium genuine carbon fibre option for customers looking for an authentic carbon finish.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper alignment and secure fitment.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Available on eligible products
Shipping Available
Across Canada & eligible international destinations
A bold ADRO-inspired front-end upgrade designed to give the G20 LCI a sharper, lower and more aggressive profile.
Where Style & Performance Collide.
Upgrade your BMW with our M-Style Carbon Fibre Mirror Caps, designed as direct replacements for compatible factory M-style wing mirror housings.
Featuring the distinctive extended M-style wing design, these mirror caps provide a sharper and more aggressive exterior appearance while maintaining a clean, OEM-style fit.
Constructed from Real Carbon Fibre for a premium and authentic carbon fibre finish.
Vehicle Fitment
BMW M2 (G87) — 2023+
M2
BMW 2 Series (G42) — 2022+
M240i
BMW 3 Series (G20) — 2021+
M340i
BMW M3 (G80) — 2021+
M3 • M3 Competition
BMW 4 Series (G22/G23) — 2021+
M440i
BMW M4 (G82/G83) — 2021+
M4 • M4 Competition
Important Fitment Notice
These mirror caps are designed for vehicles equipped with the compatible M-style wing mirror housing. They are not intended as a universal replacement for every G20, G22, G23 or G42 mirror configuration.
Please provide us with your vehicle's year, exact model, and a photo of the factory mirror housing before ordering if you are unsure about compatibility.
Features
M-style wing mirror design
Direct replacement mirror caps
Replaces the factory exterior mirror covers
Real Carbon Fibre construction
Authentic carbon fibre weave
OEM-style fit and appearance
Includes driver and passenger side mirror caps
Professional installation available
Available Finish
Real Carbon Fibre
Our premium genuine carbon fibre option for customers looking for an authentic carbon finish.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper fitment and secure installation without damaging the mirror housing.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Available on eligible products
Shipping Available
Across Canada & eligible international destinations
A genuine carbon fibre replacement designed to bring the signature M-style wing mirror appearance to compatible BMW models.
Where Style & Performance Collide.
Upgrade the front end of your BMW M3 or M4 with our G8X V-Style Front Lip V1, designed to create a lower, wider and more aggressive profile while complementing the distinctive factory lines of the G8X front bumper.
The V1 design features a wide continuous centre section with sharply raised outer extensions, creating a sleek V-style profile that follows the lower edges of the factory bumper for a clean and integrated appearance.
Available in Gloss Black, Carbon Lookalike, or Real Dry Carbon Fibre to complement different exterior builds.
Vehicle Fitment
BMW M3 (G80) — 2021+
M3 • M3 Competition
BMW M4 (G82) — 2021+
M4 • M4 Competition
BMW M4 Convertible (G83) — 2021+
M4 • M4 Competition
Important Fitment Notice
Designed for the BMW G80 M3, G82 M4, and G83 M4 Convertible.
Please provide us with your vehicle's year, exact model, and a photo of the front bumper before ordering if you are unsure about compatibility.
Features
V-Style V1 front lip design
Wide continuous centre section
Sharply raised outer extensions
Creates a lower and wider front-end profile
Designed to complement the factory G8X front bumper
Available in Gloss Black, Carbon Lookalike, or Real Dry Carbon Fibre
Professional installation available
Available Finishes
Gloss Black
A clean, high-gloss finish that pairs naturally with other gloss black exterior accents.
Carbon Lookalike
Provides the appearance of carbon fibre for customers looking for a carbon-style finish without choosing genuine carbon fibre.
Real Dry Carbon Fibre
Our premium genuine dry carbon fibre option for customers looking for a lightweight construction and authentic carbon finish.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper alignment and secure fitment.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Available on eligible products
Shipping Available
Across Canada & eligible international destinations
A distinctive V-style front lip designed to give the G8X M3 and M4 a lower, wider and more aggressive front-end profile.
Where Style & Performance Collide.
Upgrade the front end of your BMW M3 or M4 with our G8X CS-Style Carbon Fibre Front Lip V2, designed to create a sharper, lower and more aggressive profile inspired by the distinctive styling of the M3 CS.
The V2 design adds a pronounced carbon fibre extension across the lower front bumper, creating a wider and more performance-focused appearance while complementing the factory lines of the G8X front end.
Available exclusively in Real Carbon Fibre for a premium and authentic carbon finish.
Vehicle Fitment
BMW M3 (G80) — 2021+
M3 • M3 Competition
BMW M4 (G82) — 2021+
M4 • M4 Competition
BMW M4 Convertible (G83) — 2021+
M4 • M4 Competition
Important Fitment Notice
Designed for the BMW G80 M3, G82 M4, and G83 M4 Convertible.
Please provide us with your vehicle's year, exact model, and a photo of the front bumper before ordering if you are unsure about compatibility.
Features
CS-inspired V2 front lip design
Performance-focused lower front-end profile
Creates a lower and wider appearance
Designed to complement the factory G8X front bumper
Genuine carbon fibre construction
Authentic carbon fibre finish
Professional installation available
Available Finish
Real Carbon Fibre
Our premium genuine carbon fibre option for customers looking for an authentic carbon finish.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper alignment and secure fitment.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Available on eligible products
Shipping Available
Across Canada & eligible international destinations
A CS-inspired genuine carbon fibre upgrade designed to give the G8X M3 and M4 a sharper and more aggressive front-end profile.
Where Style & Performance Collide.
Upgrade the rear profile of your BMW 3 Series or M3 with our G20/G80 PSM-Style Trunk Spoiler V3, featuring a more aggressive high-kick profile for a noticeably sharper rear-end appearance.
The PSM-inspired V3 design features a pronounced upward sweep with extended outer edges, creating a taller and more aggressive profile than the M3-style and M4-style options while following the contours of the G20/G80 trunk.
Available in Gloss Black, Carbon Lookalike, or Real Carbon Fibre.
Vehicle Fitment
BMW 3 Series (G20) — 2019+
330i • M340i
BMW M3 (G80) — 2021+
M3 • M3 Competition
Important Fitment Notice
Designed for compatible BMW G20 3 Series and G80 M3 sedan trunk lids.
Please provide us with your vehicle's year and exact model before ordering if you are unsure about compatibility.
Features
PSM-inspired V3 trunk spoiler design
Aggressive high-kick profile
Pronounced upward sweep
Extended outer edges
Follows the contours of the factory trunk
Creates a more aggressive rear-end appearance
Available in three finish options
Professional installation available
Available Finishes
Gloss Black
A clean, high-gloss finish that pairs naturally with other gloss black exterior accents.
Carbon Lookalike
Provides the appearance of carbon fibre for customers looking for a carbon-style finish without choosing genuine carbon fibre.
Real Carbon Fibre
Our premium genuine carbon fibre option featuring an authentic carbon weave and finish.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper positioning, adhesion and alignment with the trunk.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Available on eligible products
Shipping Available
Across Canada & eligible international destinations
An aggressive PSM-inspired high-kick spoiler designed to give the G20 3 Series and G80 M3 a more pronounced rear profile.
Where Style & Performance Collide.
Upgrade the rear profile of your BMW 3 Series or M3 with our G20/G80 M Performance-Style Trunk Spoiler V4, designed to add a sporty and refined accent while maintaining a clean, OEM-inspired appearance.
The M Performance-inspired V4 design features a sculpted profile with a pronounced trailing edge, following the contours of the G20/G80 trunk for a balanced appearance that sits between subtle factory styling and a more aggressive aftermarket spoiler.
Available in Gloss Black, Carbon Lookalike, or Real Carbon Fibre.
Vehicle Fitment
BMW 3 Series (G20) — 2019+
330i • M340i
BMW M3 (G80) — 2021+
M3 • M3 Competition
Important Fitment Notice
Designed for compatible BMW G20 3 Series and G80 M3 sedan trunk lids.
Please provide us with your vehicle's year and exact model before ordering if you are unsure about compatibility.
Features
M Performance-inspired V4 trunk spoiler design
Sculpted, sporty profile
Pronounced trailing edge
Follows the contours of the factory trunk
OEM-inspired appearance
Adds a more defined rear profile
Available in three finish options
Professional installation available
Available Finishes
Gloss Black
A clean, high-gloss finish that pairs naturally with other gloss black exterior accents.
Carbon Lookalike
Provides the appearance of carbon fibre for customers looking for a carbon-style finish without choosing genuine carbon fibre.
Real Carbon Fibre
Our premium genuine carbon fibre option featuring an authentic carbon weave and finish.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper positioning, adhesion and alignment with the trunk.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Available on eligible products
Shipping Available
Across Canada & eligible international destinations
A clean M Performance-inspired spoiler designed to give the G20 3 Series and G80 M3 a sportier and more defined rear profile.
Where Style & Performance Collide.
Upgrade the side profile of your BMW 3 Series with our G20 M-Style Side Skirts V1, designed with a clean, flat extension that runs along the lower rocker panels for a lower and more aggressive appearance.
The V1 design features a straight, low-profile shape from front to rear, providing a clean extension beneath the factory side skirts without excessive sculpting or raised sections. The simple profile pairs naturally with front lips, rear splitters and other exterior upgrades.
Available in Gloss Black, Carbon Lookalike, or Real Carbon Fibre.
Vehicle Fitment
BMW 3 Series (G20) — 2019+
330i • M340i
Important Fitment Notice
Designed for compatible BMW G20 3 Series sedan side skirt and rocker-panel configurations.
Please provide us with your vehicle's year, exact model, and a photo of the side profile before ordering if you are unsure about compatibility.
Features
M-style V1 side skirt design
Clean, flat-profile construction
Straight front-to-rear design
Extends the lower side profile of the vehicle
Creates a lower and wider appearance
Designed to complement front lips and rear exterior upgrades
Includes driver and passenger side skirts
Available in three finish options
Professional installation available
Available Finishes
Gloss Black
A clean, high-gloss finish that pairs naturally with other gloss black exterior accents.
Carbon Lookalike
Provides the appearance of carbon fibre for customers looking for a carbon-style finish without choosing genuine carbon fibre.
Real Carbon Fibre
Our premium genuine carbon fibre option featuring an authentic carbon weave and finish.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper positioning, alignment and secure fitment along both sides of the vehicle.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Available on eligible products
Shipping Available
Across Canada & eligible international destinations
A clean, flat-profile side skirt upgrade designed to give the G20 a lower, wider and more complete exterior appearance.
Where Style & Performance Collide.
Upgrade the side profile of your BMW 3 Series with our G20 M-Style Side Skirts V2, featuring a more sculpted design that follows the natural contours of the vehicle's lower body.
Unlike the straight, flat profile of V1, the V2 design uses a more integrated, contoured shape that flows with the factory rocker panels, creating a smooth transition from the front to the rear of the vehicle. The result is a lower and sportier appearance while maintaining a clean, body-integrated look.
Available in Gloss Black, Carbon Lookalike, or Real Carbon Fibre.
Vehicle Fitment
BMW 3 Series (G20) — 2019+
330i • M340i
Important Fitment Notice
Designed for compatible BMW G20 3 Series sedan side skirt and rocker-panel configurations.
Please provide us with your vehicle's year, exact model, and a photo of the side profile before ordering if you are unsure about compatibility.
Features
M-style V2 side skirt design
Sculpted, body-contoured profile
Designed to flow with the factory rocker panels
Smooth front-to-rear transition
More integrated appearance than a traditional flat side skirt extension
Creates a lower and more defined side profile
Includes driver and passenger side skirts
Available in three finish options
Professional installation available
Available Finishes
Gloss Black
A clean, high-gloss finish that pairs naturally with other gloss black exterior accents.
Carbon Lookalike
Provides the appearance of carbon fibre for customers looking for a carbon-style finish without choosing genuine carbon fibre.
Real Carbon Fibre
Our premium genuine carbon fibre option featuring an authentic carbon weave and finish.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper positioning, alignment and secure fitment along both sides of the vehicle.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Available on eligible products
Shipping Available
Across Canada & eligible international destinations
A sculpted side skirt upgrade designed to flow naturally with the G20 body lines for a lower and more integrated appearance.
Where Style & Performance Collide.
Upgrade the side profile of your BMW 3 Series with our G20 M-Style Side Skirts V3, featuring a clean extended profile with a distinctive raised rear section for a sharper and more aggressive appearance.
The V3 design maintains a mostly straight, low-profile extension along the rocker panel before sweeping upward near the rear wheel, creating a pronounced finishing point that adds definition to the rear portion of the vehicle's side profile.
Available in Gloss Black, Carbon Lookalike, or Real Carbon Fibre.
Vehicle Fitment
BMW 3 Series (G20) — 2019+
330i • M340i
Important Fitment Notice
Designed for compatible BMW G20 3 Series sedan side skirt and rocker-panel configurations.
Please provide us with your vehicle's year, exact model, and a photo of the side profile before ordering if you are unsure about compatibility.
Features
M-style V3 side skirt design
Clean, extended lower profile
Distinctive raised rear section
Upward-sweeping design near the rear wheel
Creates a lower and more aggressive side profile
Adds additional definition toward the rear of the vehicle
Includes driver and passenger side skirts
Available in three finish options
Professional installation available
Available Finishes
Gloss Black
A clean, high-gloss finish that pairs naturally with other gloss black exterior accents.
Carbon Lookalike
Provides the appearance of carbon fibre for customers looking for a carbon-style finish without choosing genuine carbon fibre.
Real Carbon Fibre
Our premium genuine carbon fibre option featuring an authentic carbon weave and finish.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper positioning, alignment and secure fitment along both sides of the vehicle.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Available on eligible products
Shipping Available
Across Canada & eligible international destinations
A sharp side skirt design featuring a raised rear profile for a more aggressive and defined G20 exterior.
Where Style & Performance Collide.
Upgrade the rear profile of your BMW 330i with our G20 330i Non-M Rear Diffuser, designed specifically for the factory non-M Sport rear bumper.
The design features a wide lower diffuser profile with five pronounced vertical canards across the centre section and extended outer edges, giving the rear bumper a lower, wider and significantly more aggressive appearance while retaining the factory-style exhaust layout.
Designed specifically for customers with a Non-M G20 330i who want a more performance-inspired rear end without converting to an M Sport bumper.
Available in Gloss Black or Carbon Lookalike.
Vehicle Fitment
BMW 3 Series (G20) — 2019–2022 (Pre-LCI)
330i Non-M Sport
Important Fitment Notice
Designed specifically for the G20 330i equipped with the factory Non-M Sport rear bumper.
Not designed for M Sport, M340i or G80 M3 rear bumpers.
Please provide us with your vehicle's year, exact model, and a photo of the rear bumper before ordering if you are unsure about compatibility.
Features
Designed specifically for the G20 330i Non-M Sport rear bumper
Five pronounced centre canards
Wide lower diffuser profile
Extended outer sections
Retains the factory-style exhaust positioning
Creates a lower and more aggressive rear appearance
Available in Gloss Black or Carbon Lookalike
Professional installation available
Available Finishes
Gloss Black
A clean, high-gloss finish that pairs naturally with other gloss black exterior accents.
Carbon Lookalike
Provides the appearance of carbon fibre for customers looking for a carbon-style finish without choosing genuine carbon fibre.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper alignment and secure fitment to the factory rear bumper.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Available on eligible products
Shipping Available
Across Canada & eligible international destinations
A five-canard diffuser designed specifically to give the Non-M G20 330i a lower, wider and more aggressive rear profile.
Where Style & Performance Collide.
Upgrade the rear profile of your BMW 330i with our G20 330i Pre-LCI M Performance-Style Rear Diffuser V1, designed for models equipped with the factory M Sport rear bumper.
The V1 design features four large, pronounced vertical canards across the centre section, surrounded by a sculpted full-width diffuser profile that integrates into both outer corners of the rear bumper. Its deeper centre fins and extended side sections create a noticeably more aggressive and performance-inspired rear appearance.
Available in Gloss Black or Carbon Lookalike.
Vehicle Fitment
BMW 3 Series (G20) — 2019–2022 (Pre-LCI)
330i • 330i xDrive
Important Fitment Notice
Designed specifically for BMW G20 330i models equipped with the factory M Sport rear bumper.
Not compatible with the Non-M Sport rear bumper, M340i rear bumper, G80 M3, or LCI models.
Please provide us with your vehicle's year, exact model, and a photo of the rear bumper before ordering if you are unsure about compatibility.
Features
M Performance-inspired rear diffuser design
Four large centre canards for a more aggressive diffuser profile
Deep centre section that adds definition beneath the rear bumper
Sculpted outer sections that integrate into both bumper corners
Full-width replacement design
Creates a lower, wider and more aggressive rear appearance
Available in Gloss Black or Carbon Lookalike
Professional installation available
Available Finishes
Gloss Black
A clean, high-gloss finish that pairs naturally with other gloss black exterior accents.
Carbon Lookalike
Provides the appearance of carbon fibre for customers looking for a carbon-style finish without choosing genuine carbon fibre.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper alignment and secure fitment to the factory rear bumper.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Available on eligible products
Shipping Available
Across Canada & eligible international destinations
A bold M Performance-inspired four-canard diffuser designed to give the Pre-LCI G20 330i a deeper and more aggressive rear profile.
Where Style & Performance Collide.
Upgrade the rear profile of your BMW M340i with our G20 M340i Pre-LCI M Performance-Style Rear Diffuser V1, designed specifically for the factory M340i rear bumper.
The V1 design features four large, pronounced vertical canards across the centre section, surrounded by a sculpted full-width diffuser profile that integrates into both outer corners of the rear bumper. Its deeper centre fins and extended side sections create a noticeably more aggressive and performance-inspired rear appearance while accommodating the M340i exhaust configuration.
Available in Gloss Black or Carbon Lookalike.
Vehicle Fitment
BMW 3 Series (G20) — 2020–2022 (Pre-LCI)
M340i • M340i xDrive
Important Fitment Notice
Designed specifically for Pre-LCI BMW G20 M340i models with the factory M340i rear bumper and exhaust configuration.
Not compatible with the 330i rear bumper, Non-M Sport rear bumper, G80 M3, or LCI models.
Please provide us with your vehicle's year, exact model, and a photo of the rear bumper before ordering if you are unsure about compatibility.
Features
M Performance-inspired rear diffuser design
Four large centre canards for a more aggressive diffuser profile
Deep centre section that adds definition beneath the rear bumper
Sculpted outer sections that integrate into both bumper corners
Designed around the M340i exhaust configuration
Full-width replacement design
Creates a lower, wider and more aggressive rear appearance
Available in Gloss Black or Carbon Lookalike
Professional installation available
Available Finishes
Gloss Black
A clean, high-gloss finish that pairs naturally with other gloss black exterior accents.
Carbon Lookalike
Provides the appearance of carbon fibre for customers looking for a carbon-style finish without choosing genuine carbon fibre.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper alignment and secure fitment to the factory rear bumper.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Available on eligible products
Shipping Available
Across Canada & eligible international destinations
A bold M Performance-inspired four-canard diffuser designed to give the Pre-LCI G20 M340i a deeper and more aggressive rear profile.
Where Style & Performance Collide.
Upgrade the rear profile of your BMW M340i with our G20 M340i Pre-LCI Competition-Style Rear Diffuser V2, designed specifically around the factory M340i rear bumper and exhaust configuration.
The Competition-style V2 design features a bold, structured centre section with four pronounced vertical fins, paired with large integrated exhaust surrounds and sculpted outer sections that extend upward into the factory bumper. Compared with the M Performance-style V1, this design creates a more integrated and substantial rear appearance.
Available in Gloss Black or Carbon Lookalike.
Vehicle Fitment
BMW 3 Series (G20) — 2020–2022 (Pre-LCI)
M340i • M340i xDrive
Important Fitment Notice
Designed specifically for Pre-LCI BMW G20 M340i models with the factory M340i rear bumper and exhaust configuration.
Not compatible with 330i, Non-M Sport, G80 M3, or LCI rear bumpers.
Please provide us with your vehicle's year, exact model, and a photo of the rear bumper before ordering if you are unsure about compatibility.
Features
Competition-inspired V2 design
Four pronounced centre fins
Sculpted and structured centre diffuser section
Large integrated M340i exhaust surrounds
Extended outer sections that integrate into the rear bumper
Full-width replacement design
Creates a deeper and more aggressive rear profile
Available in Gloss Black or Carbon Lookalike
Professional installation available
Available Finishes
Gloss Black
A clean, high-gloss finish that pairs naturally with other gloss black exterior accents.
Carbon Lookalike
Provides the appearance of carbon fibre for customers looking for a carbon-style finish without choosing genuine carbon fibre.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper alignment around the exhaust outlets and secure fitment to the factory rear bumper.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Available on eligible products
Shipping Available
Across Canada & eligible international destinations
A Competition-inspired diffuser designed to give the Pre-LCI G20 M340i a deeper, more structured and aggressive rear appearance.
Where Style & Performance Collide.
Upgrade the rear profile of your BMW M340i with our G20 M340i Pre-LCI Competition-Style Rear Diffuser V2.1, featuring an aggressive Competition-inspired design with an integrated rectangular LED brake light positioned directly in the centre of the diffuser.
The V2.1 design features four pronounced vertical fins, large integrated exhaust surrounds and sculpted outer sections that create a deeper and more aggressive rear profile. At the centre sits the distinctive rectangular LED brake light, adding an illuminated focal point to the diffuser and giving the rear of the M340i a more performance-inspired appearance.
Unlike V2, which features the same Competition-style concept without integrated lighting, V2.1 incorporates the centre LED brake light directly into the diffuser design for a more distinctive look both illuminated and unlit.
Available in Gloss Black or Carbon Lookalike.
Vehicle Fitment
BMW 3 Series (G20) — 2020–2022 (Pre-LCI)
M340i • M340i xDrive
Important Fitment Notice
Designed specifically for Pre-LCI BMW G20 M340i models with the factory M340i rear bumper and exhaust configuration.
Not compatible with 330i, Non-M Sport, G80 M3, or LCI rear bumpers.
This V2.1 version is specifically distinguished by its rectangular centre LED brake light. Other diffuser versions may feature no lighting or a different LED light design.
Please provide us with your vehicle's year, exact model, and a photo of the rear bumper before ordering if you are unsure about compatibility.
Features
Integrated rectangular centre LED brake light
Competition-inspired V2.1 diffuser design
LED light integrated directly into the centre diffuser section
Four pronounced centre fins
Sculpted and structured centre profile
Large integrated M340i exhaust surrounds
Extended outer sections that integrate into the rear bumper
Full-width replacement design
Creates a deeper and more aggressive rear appearance
Available in Gloss Black or Carbon Lookalike
Available Finishes
Gloss Black
A clean, high-gloss finish that pairs naturally with other gloss black exterior accents.
Carbon Lookalike
Provides the appearance of carbon fibre for customers looking for a carbon-style finish without choosing genuine carbon fibre.
Pickup & Shipping
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Shipping Available
Across Canada & eligible international destinations
A Competition-inspired diffuser combining an aggressive four-fin design with a distinctive integrated rectangular LED brake light.
Where Style & Performance Collide.
Upgrade the rear profile of your BMW M340i with our G20 M340i LCI Competition-Style Rear Diffuser V1, designed specifically for the updated LCI M340i rear bumper.
The V1 design features a deep Competition-inspired centre section with four prominent vertical fins, framed by sharply sculpted outer sections that integrate around the factory M340i exhaust outlets. The angular upper detailing and pronounced centre profile give the rear bumper a lower, wider and more aggressive appearance while maintaining a clean, integrated look.
Available in Gloss Black or Carbon Lookalike.
Vehicle Fitment
BMW 3 Series (G20) — 2023+ (LCI)
M340i • M340i xDrive
Important Fitment Notice
Designed specifically for LCI BMW G20 M340i models with the factory M340i rear bumper and exhaust configuration.
Not compatible with Pre-LCI models, 330i rear bumpers, Non-M Sport rear bumpers, or G80 M3 models.
Please provide us with your vehicle's year, exact model, and a photo of the rear bumper before ordering if you are unsure about compatibility.
Features
Competition-inspired V1 design
Four prominent centre diffuser fins
Deep and structured centre diffuser profile
Sharp, angular upper detailing
Sculpted sections surrounding the M340i exhaust outlets
Full-width replacement design
Integrates closely with the factory LCI rear bumper
Creates a lower, wider and more aggressive rear appearance
Available in Gloss Black or Carbon Lookalike
Professional installation available
Available Finishes
Gloss Black
A smooth, high-gloss finish that complements the factory exterior trim while emphasizing the diffuser's sharp and sculpted design.
Carbon Lookalike
A premium carbon-style finish featuring a detailed woven appearance for customers looking for the visual character of carbon fibre without choosing genuine carbon fibre.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper alignment, exhaust clearance and secure fitment to the factory rear bumper.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Appointment required
Shipping Available
Across Canada & eligible international destinations
A Competition-inspired diffuser designed to give the LCI M340i a deeper, wider and more aggressive rear profile.
Where Style & Performance Collide.
Upgrade the rear profile of your BMW M340i with our G20 M340i LCI M Performance-Style LED Rear Diffuser V2, featuring a bold full-width design with an integrated vertical LED brake light positioned directly in the centre of the diffuser.
The V2 design features a deep, angular centre section with four prominent vertical diffuser fins, surrounded by large sculpted exhaust openings and extended outer sections that integrate into the LCI rear bumper. The layered upper profile and pronounced lower fins give the M340i a significantly deeper, wider and more aggressive rear appearance.
At the centre sits the defining feature of this design — a slim vertical LED brake light integrated between the diffuser fins. Its straight-line design creates a distinctive illuminated focal point at the centre of the rear bumper while complementing the aggressive geometry of the diffuser.
Available in Gloss Black or Carbon Lookalike.
Vehicle Fitment
BMW 3 Series (G20) — 2023+ (LCI)
M340i • M340i xDrive
Important Fitment Notice
Designed specifically for LCI BMW G20 M340i models equipped with the factory M340i rear bumper and exhaust configuration.
Not compatible with Pre-LCI models, 330i rear bumpers, Non-M Sport rear bumpers, or G80 M3 models.
This V2 version features an integrated vertical centre LED brake light. Please confirm your vehicle's year, exact model, and rear bumper configuration before ordering if you are unsure about compatibility.
Features
Integrated vertical centre LED brake light
M Performance-inspired V2 design
Four prominent vertical diffuser fins
Deep and angular centre diffuser profile
Layered upper centre section
Large integrated M340i exhaust openings
Sculpted outer sections extending across the rear bumper
Full-width replacement design
Creates a lower, wider and more aggressive rear appearance
Available in Gloss Black or Carbon Lookalike
Available Finishes
Gloss Black
A smooth, high-gloss finish that complements the factory exterior trim while emphasizing the diffuser's sharp lines, deep fins and sculpted rear profile.
Carbon Lookalike
A premium carbon-style finish featuring a detailed woven appearance for customers looking for the visual character of carbon fibre without choosing genuine carbon fibre.
Pickup & Shipping
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Shipping Available
Across Canada & eligible international destinations
An aggressive M Performance-inspired diffuser combining a deep four-fin profile with a distinctive integrated vertical LED brake light.
Where Style & Performance Collide.
Upgrade the front end of your BMW 3 Series 330i with our G20 Pre-LCI Non-M Front Lip, designed specifically for models equipped with the factory non-M Sport front bumper.
The design follows the lower contours of the factory bumper to create a lower, wider and sportier front-end appearance while maintaining a clean and integrated look with the original body lines.
Available in Gloss Black or Carbon Lookalike to complement different exterior builds.
Vehicle Fitment
BMW 3 Series (G20) — 2019–2022 (Pre-LCI)
330i
Important Fitment Notice
Designed specifically for 2019–2022 Pre-LCI BMW G20 330 models equipped with the standard non-M Sport front bumper.
Not designed for vehicles equipped with the M Sport front bumper.
Please provide us with your vehicle's year, exact model, and a photo of the front bumper before ordering if you are unsure about compatibility.
Features
Designed specifically for the G20 non-M Sport front bumper
Sporty front splitter design
Follows the factory lower bumper contours
Creates a lower and wider front-end appearance
Clean, integrated fit
Available in Gloss Black or Carbon Lookalike
Professional installation available
Available Finishes
Gloss Black
A clean, high-gloss finish that pairs naturally with other gloss black exterior accents.
Carbon Lookalike
Provides the appearance of carbon fibre for customers looking for a carbon-style finish without choosing genuine carbon fibre.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper alignment and secure fitment.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Available on eligible products
Shipping Available
Across Canada & eligible international destinations
A clean and sporty front-end upgrade designed specifically for the G20 non-M Sport bumper.
Where Style & Performance Collide.
Upgrade the front end of your BMW 3 Series with our G20 Pre-LCI Carbon Fibre Front Lip V5, designed specifically for the M Sport front bumper with a wide, low-profile design and distinctive centre detailing.
The V5 design features a continuous one-piece profile with raised centre fins and upward-sweeping outer extensions, creating a lower and wider appearance while following the contours of the factory M Sport bumper.
Available exclusively in Real Carbon Fibre for a premium, authentic carbon finish.
Vehicle Fitment
BMW 3 Series (G20) — 2019–2022 (Pre-LCI)
330i • M340i
Important Fitment Notice
Designed specifically for 2019–2022 Pre-LCI BMW G20 models equipped with the M Sport front bumper.
Not designed for vehicles equipped with the standard non-M Sport front bumper.
Please provide us with your vehicle's year, exact model, and a photo of the front bumper before ordering if you are unsure about compatibility.
Features
V5 performance-inspired front lip design
Designed for the Pre-LCI G20 M Sport front bumper
Continuous one-piece profile
Raised centre fins
Upward-sweeping outer extensions
Creates a lower and wider front-end appearance
Genuine carbon fibre construction
Professional installation available
Available Finish
Real Carbon Fibre
Our premium genuine carbon fibre option for customers looking for an authentic carbon finish.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper alignment and secure fitment.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Available on eligible products
Shipping Available
Across Canada & eligible international destinations
A distinctive genuine carbon fibre front lip designed to give the G20 a lower, wider and more aggressive front-end profile.
Where Style & Performance Collide.
Upgrade the front end of your BMW M3 or M4 with our G8X Performance-Style Front Grill, designed to replace the factory grill with a cleaner, more aggressive and performance-inspired appearance.
Choose between CSL-Style, ST-Style, or V-Style designs, each offering a distinctive interpretation of the G8X front end while maintaining an integrated appearance with the factory bumper.
Available in Gloss Black or Real Carbon Fibre.
Vehicle Fitment
BMW M3 (G80) — 2021–2023
M3 • M3 Competition
BMW M4 (G82) — 2021–2023
M4 • M4 Competition
BMW M4 Convertible (G83) — 2021–2023
M4 • M4 Competition
Important Fitment Notice
Please confirm your vehicle's year, exact model, and front grill configuration before ordering if you are unsure about compatibility.
For CSL-Style orders, ACC compatibility will be confirmed with you before your order is processed to ensure the correct grill configuration is supplied.
Available Styles
CSL-Style
A motorsport-inspired open grill design featuring prominent horizontal centre sections and an aggressive CSL-inspired appearance.
ST-Style
A structured open grill design featuring multiple horizontal sections for a distinctive and aggressive front-end appearance.
V-Style
A cleaner, more open design with simplified lower openings for a sleek and performance-focused appearance.
Features
Three distinct performance-inspired designs
Direct replacement for the factory front grill
Designed for the G8X M3 and M4 platform
CSL-Style available for vehicles with or without ACC
Open, aggressive front-end appearance
Available in Gloss Black or Real Carbon Fibre
Professional installation available
Available Finishes
Gloss Black
A clean, high-gloss finish that pairs naturally with other gloss black exterior accents.
Real Carbon Fibre
Our premium genuine carbon fibre option for customers looking for an authentic carbon finish.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper alignment and secure fitment.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Available on eligible products
Shipping Available
Across Canada & eligible international destinations
Three distinctive grill designs for a more aggressive G8X front end.
Where Style & Performance Collide.
Upgrade the front end of your BMW M3 or M4 with our G8X CS-Style Front Grill, designed to replace the factory grill with a cleaner and more aggressive design inspired by the distinctive styling of the M3 CS.
The open CS-style design creates a sharper, more performance-focused appearance while maintaining a clean and integrated look with the factory front bumper.
Finished exclusively in Gloss Black for a sleek appearance that pairs naturally with other gloss black exterior accents.
Vehicle Fitment
BMW M3 (G80) — 2021–2023
M3 • M3 Competition
BMW M4 (G82) — 2021–2023
M4 • M4 Competition
BMW M4 Convertible (G83) — 2021–2023
M4 • M4 Competition
Important Fitment Notice
Please confirm your vehicle's year, exact model, and front grill configuration before ordering if you are unsure about compatibility.
ACC compatibility will be confirmed before the order is processed to ensure the correct grill configuration is supplied.
Features
CS-inspired front grill design
Direct replacement for the factory front grill
Open, performance-inspired appearance
Designed for the G8X M3 and M4 platform
Gloss Black finish
Clean and aggressive front-end upgrade
Professional installation available
Available Finish
Gloss Black
A clean, high-gloss finish that pairs naturally with other gloss black exterior accents.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper alignment and secure fitment.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Available on eligible products
Shipping Available
Across Canada & eligible international destinations
A distinctive CS-inspired front-end upgrade for the G8X M3 and M4 platform.
Where Style & Performance Collide.
Upgrade the rear profile of your BMW 3 Series or M3 with our G20/G80 M4-Style Trunk Spoiler V2, featuring a more pronounced profile for customers looking for a stronger rear-end appearance.
The M4-inspired V2 design features a raised centre profile with sharply extended outer edges, creating a more aggressive shape than the lower-profile M3-style V1 while following the contours of the G20/G80 trunk.
Available in Gloss Black, Carbon Lookalike, or Real Carbon Fibre.
Vehicle Fitment
BMW 3 Series (G20) — 2019+
330i • M340i
BMW M3 (G80) — 2021+
M3 • M3 Competition
Important Fitment Notice
Designed for compatible BMW G20 3 Series and G80 M3 sedan trunk lids.
Please provide us with your vehicle's year and exact model before ordering if you are unsure about compatibility.
Features
M4-inspired V2 trunk spoiler design
Raised, more pronounced rear profile
Extended outer edges
Follows the contours of the factory trunk
Creates a sharper and more aggressive rear appearance
Available in three finish options
Professional installation available
Available Finishes
Gloss Black
A clean, high-gloss finish that pairs naturally with other gloss black exterior accents.
Carbon Lookalike
Provides the appearance of carbon fibre for customers looking for a carbon-style finish without choosing genuine carbon fibre.
Real Carbon Fibre
Our premium genuine carbon fibre option featuring an authentic carbon weave and finish.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper positioning, adhesion and alignment with the trunk.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Available on eligible products
Shipping Available
Across Canada & eligible international destinations
A more pronounced M4-inspired spoiler designed to give the G20 3 Series and G80 M3 a sharper, more aggressive rear profile.
Where Style & Performance Collide.
Upgrade the rear profile of your BMW 3 Series or M3 with our G20/G80 M3-Style Trunk Spoiler V1, designed to add a clean, sporty accent while maintaining an OEM-inspired appearance.
The M3-style design features a low-profile raised edge that follows the natural contours of the trunk, creating a more defined rear profile without an overly aggressive appearance.
Available in Gloss Black, Carbon Lookalike, or Real Carbon Fibre to complement different exterior builds.
Vehicle Fitment
BMW 3 Series (G20) — 2019+
330i • M340i
BMW M3 (G80) — 2021+
M3 • M3 Competition
Important Fitment Notice
Designed for compatible BMW G20 3 Series and G80 M3 sedan trunk lids.
Please provide us with your vehicle's year and exact model before ordering if you are unsure about compatibility.
Features
M3-inspired V1 trunk spoiler design
Low-profile OEM-inspired appearance
Follows the factory trunk contours
Adds a more defined and sporty rear profile
Available in three finish options
Professional installation available
Available Finishes
Gloss Black
A clean, high-gloss finish that pairs naturally with other gloss black exterior accents.
Carbon Lookalike
Provides the appearance of carbon fibre for customers looking for a carbon-style finish without choosing genuine carbon fibre.
Real Carbon Fibre
Our premium genuine carbon fibre option featuring an authentic carbon weave and finish.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper positioning, adhesion and alignment with the trunk.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Available on eligible products
Shipping Available
Across Canada & eligible international destinations
A clean M3-inspired trunk spoiler designed to add a refined performance look to the G20 3 Series and G80 M3.
Where Style & Performance Collide.
Upgrade the rear profile of your BMW M340i with our G20 M340i Pre-LCI M Performance-Style LED Rear Diffuser V4, combining an aggressive M Performance-inspired diffuser profile with two integrated horizontal LED brake lights.
The V4 design features a deep, multi-fin centre section with pronounced vertical canards, sculpted exhaust surrounds and extended outer sections that give the rear of the M340i a lower, wider and more aggressive appearance.
Its defining feature is the pair of slim horizontal LED brake lights integrated directly into the centre diffuser section. Positioned symmetrically on either side of the centre, the dual-light configuration creates a distinctive illuminated rear accent while maintaining a clean and balanced appearance.
Available exclusively in Gloss Black.
Vehicle Fitment
BMW 3 Series (G20) — 2020–2022 (Pre-LCI)
M340i • M340i xDrive
Important Fitment Notice
Designed specifically for Pre-LCI BMW G20 M340i models with the factory M340i rear bumper and exhaust configuration.
Not compatible with 330i, Non-M Sport, G80 M3, or LCI rear bumpers.
This V4 version is distinguished by its dual horizontal LED brake lights integrated into the centre diffuser section.
Please provide us with your vehicle's year, exact model, and a photo of the rear bumper before ordering if you are unsure about compatibility.
Features
Two integrated horizontal LED brake lights
M Performance-inspired V4 design
Symmetrical dual-light configuration
Deep and aggressive centre diffuser profile
Multiple pronounced vertical canards
Sculpted M340i exhaust surrounds
Extended outer sections that integrate into the rear bumper
Full-width replacement design
Creates a lower, wider and more aggressive rear appearance
Available exclusively in Gloss Black
Available Finish
Gloss Black
A smooth, high-gloss finish that complements the factory exterior trim while emphasizing the diffuser's sculpted profile and aggressive rear design.
Pickup & Shipping
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Shipping Available
Across Canada & eligible international destinations
An M Performance-inspired diffuser combining an aggressive multi-fin profile with distinctive dual horizontal LED brake lights.
Where Style & Performance Collide.
Upgrade the rear profile of your BMW M340i with our G20 M340i Pre-LCI Competition-Style LED Rear Diffuser V3, featuring an aggressive Competition-inspired design with a distinctive vertical straight-line LED brake light integrated into the centre of the diffuser.
The V3 design features a deep, sculpted centre section with pronounced vertical fins, large integrated M340i exhaust surrounds, and extended outer sections that create a wider, lower and more aggressive appearance across the rear bumper.
At the centre of the diffuser sits the defining feature of V3 — a slim vertical LED brake light. The narrow straight-line design creates a clean illuminated accent at the lowest point of the diffuser, adding a distinctive performance-inspired lighting element to the rear of the M340i.
Unlike the V2.1 rectangular LED design, V3 uses a slim straight-line brake light for a cleaner and more streamlined appearance.
Available in Gloss Black or Real Carbon Fibre.
Vehicle Fitment
BMW 3 Series (G20) — 2020–2022 (Pre-LCI)
M340i • M340i xDrive
Important Fitment Notice
Designed specifically for Pre-LCI BMW G20 M340i models with the factory M340i rear bumper and exhaust configuration.
Not compatible with 330i, Non-M Sport, G80 M3, or LCI rear bumpers.
This V3 version is specifically distinguished by its vertical straight-line centre LED brake light. For the Competition-style diffuser featuring the rectangular centre LED brake light, select V2.1.
Please provide us with your vehicle's year, exact model, and a photo of the rear bumper before ordering if you are unsure about compatibility.
Features
Integrated vertical straight-line LED brake light
Competition-inspired V3 diffuser design
Slim illuminated centre accent
Deep, sculpted centre diffuser section
Pronounced vertical diffuser fins
Large integrated M340i exhaust surrounds
Extended outer sections for a wider rear appearance
Full-width replacement design
Creates a deeper and more aggressive rear profile
Available in Gloss Black or Real Carbon Fibre
Available Finishes
Gloss Black
A smooth, high-gloss finish that pairs naturally with other gloss black exterior accents.
Real Carbon Fibre
Constructed from genuine carbon fibre with an authentic woven pattern, natural depth and a premium gloss finish for a distinctive performance-focused appearance.
Pickup & Shipping
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Shipping Available
Across Canada & eligible international destinations
A Competition-inspired diffuser combining an aggressive sculpted profile with a distinctive vertical straight-line LED brake light.
Where Style & Performance Collide.
Upgrade the rear profile of your BMW M3 or M4 with our G8X M Performance-Style Rear Diffuser V1, designed to add a cleaner, more aggressive M Performance-inspired finish to the factory rear bumper.
The V1 design features a wide, sculpted profile with three pronounced vertical centre fins, creating additional depth and definition through the centre of the rear bumper. The raised outer sections flow around the factory quad-exhaust layout, maintaining the signature G8X rear-end appearance while giving the lower bumper a sharper and more performance-focused finish.
Available in Gloss Black, Carbon Lookalike, or Real Carbon Fibre.
Vehicle Fitment
BMW M3 (G80) — 2021+
M3 • M3 Competition
BMW M4 (G82/G83) — 2021+
M4 Coupe • M4 Competition Coupe • M4 Convertible • M4 Competition Convertible
Important Fitment Notice
Designed for BMW G80 M3, G82 M4 Coupe, and G83 M4 Convertible models with the compatible factory rear bumper and quad-exhaust configuration.
Please provide us with your vehicle's year, exact model, and a photo of the rear bumper before ordering if you are unsure about compatibility.
Features
M Performance-inspired V1 design
Three pronounced vertical centre fins
Wide, sculpted centre diffuser profile
Designed around the factory quad-exhaust configuration
Raised outer sections for additional rear-bumper definition
Creates a deeper and more aggressive rear appearance
Available in Gloss Black, Carbon Lookalike, or Real Carbon Fibre
Professional installation available
Available Finishes
Gloss Black
A smooth, high-gloss finish that pairs naturally with the factory gloss black exterior accents and creates a clean, aggressive appearance.
Carbon Lookalike
A premium carbon-style finish featuring a detailed woven appearance for customers looking for the visual character of carbon fibre without choosing genuine carbon fibre.
Real Carbon Fibre
Our premium genuine carbon fibre option featuring an authentic woven carbon structure, natural depth and a high-gloss finish.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper positioning, exhaust clearance and secure fitment to the factory rear bumper.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Appointment required
Shipping Available
Across Canada & eligible international destinations
An M Performance-inspired diffuser designed to add a deeper, sharper and more aggressive finish to the G8X M3 and M4 rear profile.
Where Style & Performance Collide.
Upgrade the rear profile of your BMW M340i with our G20 M340i LCI M Performance-Style LED Rear Diffuser V4, combining an aggressive M Performance-inspired diffuser profile with two integrated horizontal LED brake lights.
The V4 design features a deep, multi-fin centre section with pronounced vertical canards, sculpted M340i exhaust surrounds and extended outer sections that integrate into the updated LCI rear bumper. The aggressive lower profile adds considerably more depth and definition to the rear of the vehicle.
Its defining feature is the pair of slim horizontal LED brake lights integrated directly into the centre diffuser section. Positioned symmetrically on either side of the centre, the dual-light configuration creates a distinctive illuminated rear accent while maintaining a clean and balanced appearance.
Available exclusively in Gloss Black.
Vehicle Fitment
BMW 3 Series (G20) — 2023+ (LCI)
M340i • M340i xDrive
Important Fitment Notice
Designed specifically for LCI BMW G20 M340i models equipped with the factory M340i rear bumper and exhaust configuration.
Not compatible with Pre-LCI models, 330i rear bumpers, Non-M Sport rear bumpers, or G80 M3 models.
This V4 version is specifically distinguished by its dual horizontal LED brake lights integrated into the centre diffuser section.
Please provide us with your vehicle's year, exact model, and a photo of the rear bumper before ordering if you are unsure about compatibility.
Features
Two integrated horizontal LED brake lights
M Performance-inspired V4 design
Symmetrical dual-light configuration
Deep and aggressive centre diffuser profile
Multiple pronounced vertical canards
Sculpted M340i exhaust surrounds
Extended outer sections that integrate into the LCI rear bumper
Full-width replacement design
Creates a lower, wider and more aggressive rear appearance
Available exclusively in Gloss Black
Available Finish
Gloss Black
A smooth, high-gloss finish that complements the factory exterior trim while emphasizing the diffuser's sculpted profile and aggressive rear design.
Pickup & Shipping
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Shipping Available
Across Canada & eligible international destinations
An M Performance-inspired diffuser combining an aggressive multi-fin profile with distinctive dual horizontal LED brake lights.
Where Style & Performance Collide.
Upgrade the rear profile of your BMW M3 or M4 with our G8X CSL-Style LED Rear Diffuser V3, featuring a sculpted Real Carbon Fibre design with a distinctive integrated rectangular centre LED brake light.
The V3 design uses a wide, sculpted profile that follows the lower rear bumper and surrounds the factory quad-exhaust configuration. A raised centre section adds additional depth through the middle of the diffuser, while the outer sections extend toward the corners of the bumper for a wider and more integrated appearance.
At the centre sits the defining feature of this design — a large rectangular LED brake light housed directly within the raised centre section. The illuminated centre light adds a distinctive performance-inspired element while remaining cleanly integrated into the overall diffuser design.
Available exclusively in Real Carbon Fibre.
Vehicle Fitment
BMW M3 (G80) — 2021+
M3 • M3 Competition
BMW M4 (G82/G83) — 2021+
M4 Coupe • M4 Competition Coupe • M4 Convertible • M4 Competition Convertible
Important Fitment Notice
Designed for BMW G80 M3, G82 M4 Coupe, and G83 M4 Convertible models with the compatible factory rear bumper and quad-exhaust configuration.
This V3 design is distinguished by its raised centre section and integrated rectangular LED brake light.
Please provide us with your vehicle's year, exact model, and a photo of the rear bumper before ordering if you are unsure about compatibility.
Features
CSL-inspired V3 design
Integrated rectangular centre LED brake light
Genuine Real Carbon Fibre construction
Raised and sculpted centre diffuser section
Wide rear diffuser profile
Designed around the factory quad-exhaust configuration
Extended outer sections for a wider rear appearance
Integrated LED light housing
Creates a deeper and more aggressive lower rear profile
Available exclusively in Real Carbon Fibre
Professional installation available
Available Finish
Real Carbon Fibre
Constructed from genuine carbon fibre with an authentic woven structure, natural depth and a premium gloss finish that highlights the diffuser's sculpted profile.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper alignment, exhaust clearance and secure fitment of the diffuser and integrated LED brake light.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Appointment required
Shipping Available
Across Canada & eligible international destinations
A CSL-inspired Real Carbon Fibre rear diffuser combining a sculpted profile with a distinctive integrated rectangular LED brake light.
Where Style & Performance Collide.
Upgrade the rear profile of your BMW M3 or M4 with our G8X M Performance-Style Carbon Fibre Rear Diffuser V2, featuring a more complete three-piece rear aero design constructed exclusively in Real Carbon Fibre.
The V2 design combines a sculpted centre diffuser with three pronounced vertical fins and an integrated vertical centre brake light, creating a deeper and more aggressive lower rear profile.
Included with the centre diffuser are two matching rear bumper side extensions, positioned along the lower outer corners of the rear bumper. These additional carbon fibre pieces extend the styling outward from the diffuser and help create a more complete, connected rear aero profile across the width of the vehicle.
Available exclusively in Real Carbon Fibre.
Vehicle Fitment
BMW M3 (G80) — 2021+
M3 • M3 Competition
BMW M4 (G82/G83) — 2021+
M4 Coupe • M4 Competition Coupe • M4 Convertible • M4 Competition Convertible
Important Fitment Notice
Designed for BMW G80 M3, G82 M4 Coupe, and G83 M4 Convertible models with the compatible factory rear bumper and quad-exhaust configuration.
This product includes the centre rear diffuser and two matching rear bumper side extensions shown in the product images.
Please provide us with your vehicle's year, exact model, and a photo of the rear bumper before ordering if you are unsure about compatibility.
Features
M Performance-inspired V2 design
Three-piece rear aero package
Real Carbon Fibre construction
Integrated vertical centre brake light
Three pronounced vertical centre fins
Sculpted centre diffuser profile
Includes left and right rear bumper side extensions
Side extensions continue the carbon fibre profile toward the outer bumper corners
Designed around the factory quad-exhaust configuration
Creates a wider and more complete rear aero appearance
Available exclusively in Real Carbon Fibre
Professional installation available
Available Finish
Real Carbon Fibre
Our premium genuine carbon fibre option featuring an authentic woven carbon structure, natural depth and a high-gloss finish across the centre diffuser and matching rear bumper side extensions.
Installation
Professional installation is available for this product at our Midtown Toronto location. Installation can be selected as an add-on when ordering.
Professional installation is recommended to ensure proper positioning and alignment of the centre diffuser and both rear bumper side extensions.
Pickup, Shipping & Installation
Free Pickup Available
Toronto · Mississauga · Brampton · Ottawa · Jeddah
Professional Installation Available
Midtown Toronto · Appointment required
Shipping Available
Across Canada & eligible international destinations
A complete Real Carbon Fibre rear aero package combining an aggressive centre diffuser, integrated brake light and matching outer bumper extensions.
Where Style & Performance Collide.